Gifty.

Set up · Style · Store

Every side shines.

Your Christmas Carousel guide to a beautiful tree, a smooth first turn and an easier pack-away.

First, find your fit.

2.2 cm / 0.87 inApproximate diameter of the compatible iron centre pole.
1.8–2.1 mArtificial tree height: approximately 5.9–6.9 ft.
10 kg / 22 lbApproximate maximum total load: tree, lights and decorations combined.

Measure and weigh your tree before setup. These measurements describe compatible artificial trees; they are not instructions for adapting an incompatible pole or supporting a real tree.

Check power before plugging in. Read the stand’s electrical label and the supplied instructions, and confirm its rating matches your local supply. The included destination-specific adapter changes the plug shape; it does not convert voltage. If the rating is missing, unclear or incompatible, leave the stand unplugged and contact Gifty.

Make room for the magic.

  1. Choose a stable, level indoor spot.

    Leave space around the entire decorated tree so branches and ornaments can complete a full turn without touching walls, furniture, curtains or gifts. Keep the stand dry.

  2. Assemble with the power unplugged.

    Fit the four supporting legs and install the compatible tree exactly as shown in the supplied instructions. Check that the stand and tree are secure before decorating. Unplug before any adjustment.

  3. Connect only as directed.

    Use the stand’s tree-light connection only as directed by the supplied instructions and within the ratings shown on the stand and lights. Follow the specified cable route. Keep cords clear of the base and moving parts; do not run a lead where it can wrap around the rotating tree.

  4. Watch the first complete turn.

    After the fit, power and cable checks, select lights with rotation and observe a full turn. If the tree leans, catches or pulls a cable, switch off, unplug and correct the setup before using it again.

Your Christmas mood

Three settings. One centrepiece.

Lights + rotation

Enjoy every side. One full 360° turn takes approximately 70 seconds.

Lights only

Keep the tree still while the lights stay on.

Off

Switch off the stand. Unplug it before moving, adjusting or packing away.

Use the physical switch as identified in the supplied instructions. This guide complements those instructions and the product labels.

Dress every side.

  • Pick a simple palette. Try warm white, evergreen and gold, then repeat it around the tree.
  • Spread weight evenly. Place decorations around the full tree instead of loading one side. Keep the complete decorated tree within the load limit.
  • Make the gold star your detail. Hang your included ornament on a suitable branch, securely attached and clear of the stand and surrounding objects.
  • Finish with a slow visual check. Secure loose ribbon and dangling decorations so they cannot catch as the tree rotates. Unplug before changing anything.

Ready for next year.

  • Unplug first. Remove lights and decorations, then disassemble the stand only as directed by the supplied instructions.
  • Give the lights an easy return. Loosely coil dry light strings and use the five reusable ties to keep them tidy in storage. Do not cinch tightly.
  • Keep the ties for storage. They are not a way to secure the tree, support the stand or manage cables while it is rotating.
  • Pack dry. Place the dry, disassembled stand and its loose parts in the Gifty storage pouch, without forcing or bending components. Keep the star protected and everything in a dry place.
A little check before each season. Look over the stand, legs, cables and adapter for damage. Do not use damaged parts or continue if the tree is unstable. Keep the supplied instructions with your set.